Skip to main content
International Journal of Latest Research in Engineering and Computing (IJLREC) eISSN: 2347-6540  |  Impact Factor: 1.81 | UGC Approved Journal
Back to Archives
Vol. 5, Issue 2 (2017) Open Access
284 KB · 6 pp.

PARTIAL REPLACEMENT OF BITUMEN BY USING PLASTIC WASTE IN BITUMEN

Prince Ghalayan , Er. Sumit Rana

Abstract

Disposal of waste materials including waste plastic bags has become a serious problem and waste plastics are burnt for apparent disposal which cause environmental pollution. Utilization of waste plastic bags in bituminous mixes has proved that these enhance the properties of mix in addition to solving disposal problems. Plastic waste which is cleaned is cut into a size such that it passes through 2-3mm sieve using shredding machine. The aggregate mix is heated and the plastic is effectively coated over the aggregate. This plastic waste coated aggregate is mixed with hot bitumen and the resulted mix is used for road construction. The use of the innovative technology will not only strengthen the road construction but also increase the road life as well as will help to improve the environment. Plastic roads would be a boon for India’s hot and extremely humid climate, where temperatures frequently cross 50°C and torrential rains create havoc, leaving most of the roads with big potholes. This paper includes the results of the various laboratory tests conducted on bitumen, aggregate and bitumen-aggregate plastic mix. Key words: Waste plastic, Aggregate, Bitumen, plastic-bitumen-aggregate mix, plastic modified bitumen and plastic modified aggregate. 1.0