Skip to main content
International Journal of Latest Research in Engineering and Computing (IJLREC) eISSN: 2347-6540  |  Impact Factor: 1.81 | UGC Approved Journal

Volume and Issue Articles

Back to Archives

Volume 2, Issue 1

January-February 2014

Total articles: 3
Open Access
422 KB · 4 pp.

Experimental Investigation of Reinforced Ferrocement Concrete Plates under Impact Load

Abstract: This paper deals with the study of impact resistance and energy absorption properties of reinforced ferrocement plates under impact load. For this a series of five ferrocement plates with dimensions of 450×450×25mm were casted and tested. The impact loading was applied to the specimens by dropping a 3.5 kg steel ball from a height of 118 mm at the centre of plates. The plates were casted with reinforcing bars and different types of reinforcing meshes such as expanded mesh, rectangular welded mesh, welded mesh light and hexagonal mesh. Polypropylene fibre was used in the mix to produce fibrous concrete jacket to improve the concrete characteristics. The impact energy at initial cracking stage and at failure was determined for all the plates. The results indicated that higher energy absorption is achieved in expanded metal mesh light as they are effective in controlling the developed cracks.

View Article PDF
Get Certificate
Open Access
321 KB · 6 pp.

Different Methods for Modeling PV Panels: An

Abstract: The paper presents the simulation of solar photovoltaic module in different methods using MATLAB/ Simulink. The I-V & P-V characteristics are obtained. The maximum power point tracking (MPPT) algorithm, which is based on the incremental conductance method, is described. Also, the points indicating module voltage Vmp and current Imp at maximum power Pmax are obtained.

View Article PDF
Get Certificate
Open Access
158 KB · 15 pp.

THE BEHAVIOUR OF RIGID PAVEMENT BY NONLINEAR FINITE ELEMENT METHOD Sanjeev Gill PhD scholar shri venkateswara university, Gajraula (u.p)

Abstract: In this research, axisymmetric finite element method has been carried out to study the behavior of rigid pavement. The concrete layer, base course and sub grade have been discretized as four noded isoperimetric finite elements. The top concrete pavement and the base course have been considered as elastic medium. The material nonlinearity of the sub grade has been idealized by Drucker-Prager yield criterion. The finite element equations become nonlinear due to the nonlinear behavior of the sub grade. The nonlinear finite element equations have been solved by Full Newton Raphson Method. Based on finite element analysis pressure vs settlement, nodal stress, element stress curves; variation of nodal deflection, element stress with decreasing height and variation of deflection in horizontal direction have been obtained. Also comparison of pressure vs settlement, element stress, variation of nodal deflection, element stress with decreasing height have been made for rigid pavement with base course and rigid pavement without base course. It has been found that the pressure vs settlement, nodal stress, element stress curves are nonlinear. Hence material nonlinearity considered represents the actual behavior of the rigid pavements. The settlement obtained in the horizontal direction is almost uniform which shows the rigid behavior of the pavement. The variation of nodal deflection with depth and the element stress with depth are nonlinear. The comparison shows that the deflection and element stress of rigid pavement with base are less than the that of rigid pavement without base. When compared, the nodal deflection with depth is more for rigid pavement without base course than the rigid pavement with base course. The stress in rigid pavement with base course is more than the stress in rigid pavement without base.

View Article PDF
Get Certificate